Search results for 'stick'

Starter Diaboro ECHO (echo) for beginners that keeps quality while keeping costs to a minimum. The material used is a TPU cup that is hard to damage the cup, and the surface is matted so that when the string hits the cup, it is hard to reduce rotation. The stick comes with a wooden hand stick. Three types of accelerator (center) are available. Standard normal type (fixed shaft) : https://redcircleshop.com/starter-diaboro-echo-bearing-type-set-1807.html Bearing type set : https://redcircleshop.com/starter-diaboro-echo-bearing-type-set.html High-speed bearing type (Sanbyrin) : https://redcircleshop.com/starter-diaboro-echo-high-speed-bearing-type-set.html Please try ECHO Diaboro which Rad Factor recommends with confidence. Diameter : 128mm Height : 143mm Weight : 235g

Starter Diaboro ECHO (echo) for beginners that maintains the quality while keeping costs to a minimum. The material used is a TPU cup that is hard to damage the cup, and the surface is matted so that it is hard to reduce rotation when the string hits the cup. Diabolo applies rotation in one direction, so if you move the string with your hands while accelerating, you will not be able to give a strong rotation and the rotation will drop. This Diabolo has a built-in one-way clutch bearing (bearing that can only rotate in one direction), and even if you put power in both hands, no unnecessary force is applied, so you can easily rotate it. It is Diaboro. Also, when practicing the lap (a technique to entangle the string around the accelerator) that is necessary when applying strong rotation, if you use the normal type Diaboro, the string will wrap around the Diaboro like a yo-yo, It may lead to unexpected injuries. However, there is no such thing with the bearing type, so children can use it with peace of mind. The stick comes with a wooden hand stick. Three types of accelerator (center) are available. Standard normal type (fixed shaft), bearing type, high-speed bearing type (Sanbyrin) : https://redcircleshop.com/starter-diaboro-echo-high-speed-bearing-type-set.html Please try ECHO Diaboro which Rad Factor recommends with confidence. Diameter : 128mm Height : 140mm Weight : 250g

Starter Diaboro ECHO (echo) for beginners that maintains the quality while keeping costs to a minimum. The material used is a TPU cup that is hard to damage the cup, and the surface is matted so that it is hard to reduce rotation when the string hits the cup. Diabolo applies rotation in one direction, so if you move the string with your hands while accelerating, you will not be able to give a strong rotation and the rotation will drop. This Diabolo has a built-in one-way clutch bearing (bearing that can only rotate in one direction), and one ball bearing on each side to keep the rotation surprisingly long by reducing friction to the limit. In addition, it is designed to be 5mm wider than conventional rotating bearing accelerators, making it extremely compatible with grind tricks that make use of rotational sustainability. It is a diabolo that can be easily rotated because no unnecessary force is applied even if both hands are used. When practicing the lap (a technique to entangle the string around the accelerator) that is always necessary when applying strong rotation, if you use the normal type Diaboro, the string will wind around like a yo-yo and unexpectedly It may lead to injury. However, there is no such thing with the bearing type, so children can use it with peace of mind. This high-speed bearing (Sanbyrin) Diabolo is the easiest way for beginners to learn Diabolo. Please try Diaboro, which can be recommended for anyone from inexperienced to advanced. The stick comes with a wooden hand stick. Three types of accelerator (center) are available. Standard normal type (fixed shaft) : https://redcircleshop.com/starter-diaboro-echo-bearing-type-set-1807.html Bearing type set : https://redcircleshop.com/starter-diaboro-echo-bearing-type-set.html High-speed bearing type (Sanbyrin) : https://redcircleshop.com/starter-diaboro-echo-high-speed-bearing-type-set.html Please try ECHO Diaboro which Rad Factor recommends with confidence. The following two types of set contents are available. Diameter : 128mm Height : 143mm Weight : 262g

It is Soaring Hard diabolo by Malaysian Diaboro player Sunyang Way who has won numerous Diaboro tournaments. Soarin is a diabolo that combines the following two diabolo features: ・ Features that "Failin" is difficult to tilt and has less blur ・ Characteristics of “Shaolin” Diameter : 125mm Height : 143mm Weight: With hybrid accelerator installed approximately 255g In addition, Soarin released two types, soft type and hard type. Due to the nature of Diabolo's material, the hardness will change depending on the temperature. You can choose from two types according to the temperature or your preference. With this hard type, the cup does not become too soft even in the hot summer months, and blurring is reduced. Like Felin, the inner uses a type that is firmly fixed to the cup, making it less blurry than Shaolin. Please try the anticipated Diabolo "Soarin" that has taken the best of Diabolo so far!

This “Pyrarias Devil Stick” is a high-quality wooden devil stick that has been jointly developed by leveraging the know-how cultivated by Renegade and RADFACTOR.

Made from high-quality maple made in the United States, the production process, import process, and storage method are devised to minimize blurring. Maple is known for its resistance to impact and friction, and the material is heavy and hard.

Length : Approximately 69cm

Weight : 220g-255g

A flower stick created by the cooperation of the juggling shop Naranja and Bravo.

It has an excellent weight balance that realizes a variety of play styles. The weight of the shaft and the bell parts at both ends are adjusted, and when the bell is hooked, it is designed to receive a strong centrifugal force.

It is ideal for Belspin, 3-center stick cascade, multi-core and other technologies that are indispensable for recent flower stick techniques.

Length : Approximately 63cm Weight : 240g-270g

It is a bespoke Diabolo of the Taiwanese Diabolo team “MHD”.

The cup is designed lighter so that the centrifugal force is not applied too much with emphasis on operability.

The fixed shaft type uses a U-shaped inner, making it easier to grind and tilting. * Photo 8 Standard settings are: Metal washer, Dedicated inner, Normal accelerator, Normal type stainless steel bolt. Metal washers are also standard for sun bilin. Please try Sandia's new Diaboro! Diameter : Approx. 127 mm Height : Approx. 142 mm Weight (fixed shaft) : Approx. 248 g Weight (Sanbyrin) : Approx. 265 g

Evolution G3's first orange color debut! Please check each page for details of various Diabolo's. Wubalin G 2 : https://redcircleshop.com/g2-1445.html Evolution G3 hard type: https://redcircleshop.com/evolution-g3-hard-type.html Evolution G3 hard type normal accelerator: https://redcircleshop.com/evolution-g3-hard-type-normal-accelerator.html Diameter : Approx. 127 mm Height : Approx. 145 mm Weight (Normal accelerator) : Approx. 248 g Weight (Hybrid accelerator) : Approx. 244 g

The long-awaited new work, Ryo Yabe produced Diaboro's seventh "Soarin"!

This cup has a hardness between the hard type and the soft type, and it can withstand the sun-by-line accelerator in normal use.

Diameter :125mm

Height : 143mm

Weight : 255g. With hybrid accelerator installed

New Diabolo by Diabolo player with a world-class diabolo technology and a unique worldview, and who has won championships in various competitions in Japan and overseas, has appeared. Diameter : About 127mm Height : About 145mm Weight (Normal Axle): About 261g Weight (Hybrid Accelerator): About 263g Weight (Ubi Ling): About 268g * The fixed shaft is the weight when a metal washer is installed, and the Ubi Ling is the weight when a plastic washer is installed. Please leave a note if you want other washers.

This is our own production Tight-wire, Up standing stick Ø25, length 950cm, Overall length 6m, walking length 4.8m. 2 Versions. A: Height : 0.5m-1m B: Height : 1m-1.5m C: Height : 1.5m-2m Each model have two heights with extandable legs, if you purchase model B for example, you have two heights 1m and 1.5 m. This is extremely useful as you can perform and/or rehears at different heights. 2 Options for metal: 1)Steel with poder coating (colour of your choice) 2) Stainless steel. Approximate weight for steel or stanless steel is 100 kg (200lb) Included: 1 Up standing stick, 2 frames, main tension bar, cables. Production time 20-30 business days plus shipping. Shipping within Europe up to 14 days, shipping to North America and Asia up to 30 days, shipping to Australia and New Zealand 30-40 days. Contact us for more information and quote. Approximate delivery costs will be calculated after order is placed. We will charge delivery costs amount after confirmation from the postal service. Please expect to pay additional delivery charges.

SUNDIA latest work! "Falcon Wovalin" ※ Product photo is black inner, but the delivery will be black and blue inner. Sun Valley had a structure in which one ball bearing was further built in each side of a special rotating bearing which can rotate in only one direction, but Wobblyin has a double bearing structure with bearings added to the outer bearing It is a five-bearing diabolo that realized the marvelous turning sustaining power and the resistance when leaning. It is a diabolo that combines two different materials, a beautiful design with high design, high rotation sustainability, easy to handle weight balance. The shape of the cup is similar to Evolution Diabolo, and it is designed to have less frictional resistance when hitting a string in addition to being difficult to incline. Also, at the joint part of the cup (the part where the cord hits during play) has been subjected to blasting, the friction is reduced as much as possible. By using the traditional soarin and genufourin parts for the inner, durability and compatibility are also taken into consideration. It is Diabolo that offers possibilities to bearings 2 Diabolo and 3 Diabolo, as well as 1 Diabolo horizontal string trick, with a slight wobble feeling compared with Soaring sunbilin and Wo violin G 2. There are various types of accelerator types such as fixed axis, sunburin, and wo violin. In addition to the usual color 6 colors, the color is usually 4 colors in Taiwan's famous player model (Zhao Ji-han model (Turquoise Blue), Oriental Garden good model (Glitter white), Zheng Ju-bong model (Gold), Zhao Zhao model (Black)), total of 10 colors It is a color variation. Please try SUNDIA latest work "Falcon Diabolo" which is compatible with designability and ease of handling. Diameter : 125 Height : 147 Weight : 264gr

SUNDIA latest work! "Falcon San Vaillyn" ※ What product photo is black inner, but delivery will be white inner and black inner. Both ball bearings are built into each side of a special rotating bearing that can only be rotated in one direction, which realizes a phenomenal turning sustaining power, triple bearing diabolo. It is a diabolo that combines two different materials, a beautiful design with high design, high rotation sustainability, easy to handle weight balance. The shape of the cup is similar to Evolution Diabolo, and it is designed to have less frictional resistance when hitting a string in addition to being difficult to incline. Also, at the joint part of the cup (the part where the cord hits during play) has been subjected to blasting, the friction is reduced as much as possible. By using the traditional soarin and genufourin parts for the inner, durability and compatibility are also taken into consideration. It is Diabolo that offers possibilities to bearings 2 Diabolo and 3 Diabolo, as well as 1 Diabolo horizontal string trick, with a slight wobble feeling compared with Soaring sunbilin and Wo violin G 2. There are various types of accelerator types such as fixed axis, sunburin, and wo violin. In addition to the usual color 6 colors, the color is usually a color of 4 colors of Taiwan's famous player model (Zhao Shanghan Model (Turquoise Blue), Oriental Garden Model (Glitter White), Chung Ju Blue Model (Gold), Zhao Zhao Model (Black)) Total 10 colors It is a variation. Please try SUNDIA latest work "Falcon Diabolo" which is compatible with designability and ease of handling. Diameter : 125 Height : 147 Weight : 263gr

SUNDIA latest work! "Falcon Wovalin" ※ Product photo is black inner, but the delivery will be black and blue inner. Sun Valley had a structure in which one ball bearing was further built in each side of a special rotating bearing which can rotate in only one direction, but Wobblyin has a double bearing structure with bearings added to the outer bearing It is a five-bearing diabolo that realized the marvelous turning sustaining power and the resistance when leaning. It is a diabolo that combines two different materials, a beautiful design with high design, high rotation sustainability, easy to handle weight balance. The shape of the cup is similar to Evolution Diabolo, and it is designed to have less frictional resistance when hitting a string in addition to being difficult to incline. Also, at the joint part of the cup (the part where the cord hits during play) has been subjected to blasting, the friction is reduced as much as possible. By using the traditional soarin and genufourin parts for the inner, durability and compatibility are also taken into consideration. It is Diabolo that offers possibilities to bearings 2 Diabolo and 3 Diabolo, as well as 1 Diabolo horizontal string trick, with a slight wobble feeling compared with Soaring sunbilin and Wo violin G 2. There are various types of accelerator types such as fixed axis, sunburin, and wo violin. In addition to the usual color 6 colors, the color is usually 4 colors in Taiwan's famous player model (Zhao Ji-han model (Turquoise Blue), Oriental Garden good model (Glitter white), Zheng Ju-bong model (Gold), Zhao Zhao model (Black)), total of 10 colors It is a color variation. Please try SUNDIA latest work "Falcon Diabolo" which is compatible with designability and ease of handling. Diameter : 125 Height : 147 Weight : 265gr

SUNDIA latest work! "Falcon Diabolo" ※ Product photo is black inner, but the delivery will be white inner. It is a diabolo that combines two different materials, a beautiful design with high design, high rotation sustainability, easy to handle weight balance. The shape of the cup is similar to Evolution Diabolo, and it is designed to have less frictional resistance when hitting a string in addition to being difficult to incline. Also, at the joint part of the cup (the part where the cord hits during play) has been subjected to blasting, the friction is reduced as much as possible. By using the traditional soarin and genufourin parts for the inner, durability and compatibility are also taken into consideration. It is Diabolo that offers possibilities to bearings 2 Diabolo and 3 Diabolo, as well as 1 Diabolo horizontal string trick, with a slight wobble feeling compared with Soaring sunbailin and Wobailin G2. There are various types of accelerator types such as fixed axis, sunburin, and wo violin. In addition to the usual color 6 colors, the color is usually a color of 4 colors of Taiwan's famous player model (Zhao Shanghan Model (Turquoise Blue), Oriental Garden Model (Glitter White), Chung Ju Blue Model (Gold), Zhao Zhao Model (Black)) Total 10 colors It is a variation. Please try SUNDIA latest work "Falcon Diabolo" which is compatible with designability and ease of handling.

It is a flower stick made by Taiwan SUNDIA company. The black bell (the weight attached to both ends) is designed to easily hook the hand stick, so the unique techniques and acts of the flower stick are possible. The material uses glass fiber for the center of the center stick, and durability is outstanding. It is also recommended for beginners who are going to start flower sticks, as well as those who perform long-time performances due to their lightness, and even advanced users who use more than three flower sticks. It is a dish realizing weight saving and price reduction without changing the ease of use of conventional floral stick. Length : About 85 cm Weight: Approximately 210 g ★ This item is not included handstick. If you need, please select hand stick from the following order form. (It will be + 7.00 USD.)

By making meetings on various details at factories in Japan, we finished this ultimate Russian ball. - We did not use the ball of the ball pool, we made it from the mold. · It was not too soft, not too hard, and I pursued the best hardness that was hard to be influenced by atmospheric pressure even during the winter season. · The problem of sliding surface which tends to be in Russian balls was solved by daringly producing the condition of gloss on the surface of the ball. · It sticks to the paint, it is good coloring excellence even in RF products. · Although domestic products are expensive, they realized an affordable price through mass production. Because it is a simple Russian ball, I stick to details. Please try RF best masterpiece by all means. ★ About color The actual color may differ from the photograph. Please understand beforehand that returned or exchanged due to difference in color after ordering can not be accepted. Made in Japan

A long-awaited new work, produced by Ryo Yabe - Diabolo 7th "Soaring"!

Soarin is a diabolo that combines the features of two diabolos below. · Feeling less inclined "Feilin", less blurring

· Characteristic scratch-resistant feature of "Xiaolin" Diameter 125 mm Height 143 mm Weight:255 gr When installing the hybrid accelerator Approximately 255 g Made in Japan

By making detailed meetings at factories in Japan, we finished this ultimate Russian ball.

- We did not use the ball of the ball pool, we made it from the mold. · It was not too soft, not too hard, and I pursued the best hardness that was hard to be influenced by atmospheric pressure even during the winter season.

Diameter Weight Approximately 65 mm Approximately 85 g About 72 mm About 95 g

"Soaringin hard type", with "Sun Byrin Axel" ! With the sun by-a-ring axle, one ball bearing is built into each side of the one-way clutch bearing, making it possible to keep the rotation surprisingly long by reducing the friction to the limit. It is designed to be wider by 5 mm than the conventional rotating bearing accelerator, so compatibility with grinding tricks making full use of rotating durability is outstanding. Although it costs a little more than other Diabolos, beginners can learn Diabolo more easily. Please try this Diabolo which we can recommend to any level from inexperienced to advanced level. Diameter : 125 mm Height : 148 mm Weight (Normal Saint-Billin Axel) : Approximately 295 g Weight (Hybrid Saint-Billin Axel) : Approximately 275 g

Ryo Yabe latest design, new Diabolo "Evolution G3". This white color is a dedicated rim. Please note that if you will use other rims, there will be deviation from the cup. G2 Plus is a Diabolo designed with the premise of installing a metal washer, with an emphasis on operability. In contrast, G3 adds more weight to the edge of the cup and is designed with an emphasis on sustaining and stability of rotation. Diameter: About 125 mm Height: About 145 mm Weight (when plus washer is installed): about 248 g Made in Japan

Length: 12.0" (Short) Weight: 56 g. 2.1 OZ Length: 13.5" (Long) Weight: 57g. 2.3 OZ Color Options: Silver, Blue Made of strong carbon fiber to last and comfortable foam to grip.

Material: TPEE Weight:270gr Comes with pair of wooden sticks Cup Diameter: 130mm(5.1") Diabolo Height: 150mm (5.9") Age 9 to adults Bearing axle gives long lasting spin - desirable for performing long-sequence tricks. Top of the line - for serious and advanced players; also recommended for adult beginners

Comes with pair of wooden sticks Cup Diameter: 130mm(5.1") Diabolo Height: 145mm(5.7") Weight: 260gr Material: PU

Super Diabolo by Taibolo Age 9 to adults Cup Diameter: 130mm(5.1") Diabolo Height: 145mm (5.7") Material : TPEE Weight: 245 gr

Taiwanese star player, Clauzer Chao Two Han is best suited for whip system. Diabolo string made by SUNDIA company. The thickness is 2.2 mm and it is thick strings compared with other strings. Therefore, when playing the technique of the whip system, strings are easy to wind around Diabolo, compatibility with the technique is outstanding strings. We use the same material as regular strings, so when playing other techniques, it is possible to play without much influence. Also, because it is thicker than ordinary strings, durability is outstanding. For those who practice whip system skills from now on, this Whipplings is recommended. * Product photo The second piece is a photograph compared with RF strings 1.6 mm.

It is the best fitted carbon stick for the integral. Ferrin carbon stick 8 φ 30 cm is the base, the handle part is not a conventional grip, it is a grip made of silicon. Since the center of gravity is dispersed throughout, the maximum speed at the release of the stick releasing the stick from the hand is suppressed and it is easier to return to hand at a constant speed, so it is most suitable for release type techniques such as integral etc. We now have. Please understand beforehand that it can not be returned or exchanged due to the difference between the photograph and the actual color. There is a case where the grip part of silicon is displaced. Length Weight Thickness Approximately 30 cm Approx 76 g Approx 8 mm

It is SUNDIA carbon hand stick which is best for Whip system which Taiwanese star player, Klauser is good at Chao Two Han. Thicker than 2.2 mm thick wipstrings and non-friction strings can be installed because the thickness of the hole is larger than ordinary carbon stick. The stick has become the same stick as "Ferrin carbon stick 30 cm 7 φ". ※ Wepp strings are standard equipment. Changing to non-friction strings is also possible if there is hope. In the case of Length Thickness Weight Approximately 30 cm Approximately 7 mm Approximately 52 g

It is a wooden hand stick made by SUNDIA which is best for Whip system which Taiwanese star player, Krauser is good at Chao two toe. The thickness is 2.2 mm and thick strings are attached to one stick as compared with other strings, and when playing the whip system technique, strings are easy to wind around Diabolo, compatibility with skill is outstanding. For those who practice whip system skills from now on, this wip stick is recommended.

With the sun by-a-ring axle, one ball bearing is built into each side of the one-way clutch bearing, making it possible to keep the rotation long by surprisingly by reducing the friction to the limit. Also, compared with conventional rotary bearing accelerator, it is designed to be wider by 5 mm, so the nickname of grinding tricks making full use of rotating sustaining power is outstanding. Although it costs a little more than other Diaboro, beginners are Diabolo which can learn Diabolo most easily. Please try Diabolo which you can recommend to any level from inexperienced to advanced.

Ryo Yabe Design latest work, evolving Diabolo "Evolution G3". Diabolo of Sandia Company was generally the greatest strength of the original multistep accelerator (hybrid accelerator etc.) to make ease of use, but the accelerator occupied about 1/3 of the cost of Diabolo. This time we made it with general accelerator shape, developed based on the concept of cost reduction and pursuit of ease of use at the same time. Especially for the surface processing of the accelerator because it is simple, we are finished inferior to the hybrid accelerator quality inferior. ※ The third piece of photograph will be an enlarged photograph of normal accelerator. G2 Plus http://redcircleshop.com/g2-1447.html is a Diabolo designed with the premise of installing a metal washer, with an emphasis on operability. In contrast, G3 adds more weight to the edge of the cup and is designed with an emphasis on sustainability and stability of rotation. By replacing it with a weight rim for Evolution Diabolo which started selling newly, it is possible to make a total of 16 g heavier and further increase the centrifugal force.

http://redcircleshop.com/weight-rim-for-evolution-diabolo.html Moreover, by exchanging for the metal washer light, total 6 g becomes heavier than the nut embedded type washer, and the total of 12 g can be lighter than the conventional metal washer. http://redcircleshop.com/metal-washer-light.html

Ryo Yabe's latest work design, evolving Diabolo "Evolution G3 hard type" This is the fixed axis diabolo using the cup of Ubairin G 2.

Ryo Yabe's latest work design, evolving Diabolo "Evolution G3 hard type" This is the fixed axis diabolo using the cup of Ubairin G 2. G2 Plus is a Diabolo designed with the premise of installing a metal washer, with an emphasis on operability. In contrast, G3 adds more weight to the edge of the cup and is designed with an emphasis on sustainability and stability of rotation.

Model Evolution Diabolo of Taiwanese star player, Chao Two Han (Zhao Zhi Shan) . Cup is "Evolution G3 hard type", model with light aqua color. In addition, a decorated metal washer is installed in this exclusive model, light trim white, metal washer are standard equipment. * It is possible to change embedded type washer or a metal washer, but there is no changes at that time. For details of Diabolo's function please check each page below.

There is a case that the centrifugal force becomes an obstacle for the top-ranking person who handles three or more Diabolo at the same time. It is heavy because of the centrifugal force of a circle such as a wind mill and it becomes difficult to control. Evolution Diabolo does not rely on centrifugal force, we are making it based on the concept of decreasing the friction that occurs when strings and sticks hits the cup to the utmost limit and sustaining rotation. We designed the cup slightly thicker than Evolution G2 to increase the centrifugal force to such an extent that it does not become a burden. Although it is a slight difference in appearance, it is finished in an exquisite balance that can achieve both rotational force and operability. By replacing it with a weight rim for Evolution Diabolo which started selling newly, it is possible to make a total of 16 g heavier and further increase the centrifugal force. Moreover, by exchanging for the metal washer light, it becomes total 6g. heavier than the nut embedded type washer, and the total of 12 g can be lighter than the conventional metal washer. You can customize it to the play style that suits yourself, so please try it.

Ryo Yabe Design latest work, evolving Diabolo "Evolution G2 Plus" . Diabolo of Sandia Company was generally the greatest strength of the original multistep accelerator (hybrid accelerator etc.) to make ease of use, but the accelerator occupied about 1/3 of the cost of Diabolo. This time we made it with general accelerator shape, developed based on the concept of cost reduction and pursuit of ease of use at the same time. Especially for the surface processing of the accelerator because it is simple, we are finished inferior to the hybrid accelerator quality inferior. ※ The sixth piece of photograph will be an enlarged photograph of normal accelerator.

We are proud to present our Self standing Tight wire created and manufactured by Red Circle Shop Ltd. High quality and precise engineering and production. Tight wire will be framed for shipping.This is our own production Tight-wire. Shipping quote on request. Overall length 6m, walking length 4.8m. 2 Versions. A: Height : 0.5m-1m B: Height : 1m-1.5m (in stock) C: Height : 1.5m-2m Each model have two heights with extandable legs, if you purchase model B for example, you have two heights 1m and 1.5 m. This is extremely useful as you can perform and/or rehears at different heights. 2 Options for metal: 1)Steel with poder coating (colour of your choice) 2) Stainless steel. Approximate weight for steel or stanless steel is 100 kg (200lb) Included: 1 Up standing stick, 2 frames, main tension bar, cables. Production time 20-30 business days plus shipping. Shipping within Europe up to 14 days, shipping to North America and Asia up to 30 days, shipping to Australia and New Zealand 30-40 days. Contact us for more information and shipping quote. Shipping by Cargo only. We will charge delivery costs amount after confirmation from the postal service. Please expect to pay additional delivery charges.

It is an item to use in the humid season and many professional jugglers are using it. Please sprinkle directly on hands or tools when clubs and balls are sticky. 50 g is a very convenient size to carry and 200 g is a great value size.

It is an LED part for repair used for LED stick, LED carbon stick. "Old Rainbow" color changes slowly 7 colors slowly. "Blue" "White" will be a solid color. ※ The second piece of photograph The third piece is a light emission image.

It is a repair grip for Farin Carbon Stick 31 cm. When exchanging, use a cutter knife to strip off several places, vertical cuts in the old grip and peel off. Please cut off the part where adhesive is attached and not peeled off with a cutter knife. When installing please use adhesive for rubber and plastic. Regarding grip exchange, we ask for your own responsibility. It will be the price of only one. Two handsticks are required for one set, so please be careful when purchasing

New color "Blue" "White" on sale! Carbon stick with LED light under hand grip. Conventional products were using plastic sticks, but we used carbon in order to give priority to ease of handling. Weighing 32 grams in weight on both sides from conventional LED sticks successfully, it is a spec that can handle without stress even with complicated techniques. "Blue" "White" will be a solid color. ※ The second piece of photograph is a light emission image. We also sell repair parts for the LED part.

This stick is 30 cm in length and it is made of carbon for super advanced people. The shorter stick makes it easier to correct at 3 to 4, 4 toss. (It will be easier to draw big circles using end to end of the string) Aluminum end parts are used, the center of gravity is close to the center. To prevent the weight of the stick from being excessively light, 35 cm thick is used as the thicker than 8 mm Ferrin carbon stick, and the thickness of the hand grip varies depending on the color. Black hand grips are thick, white hand grips are using thinner ones used for 31 cm Ferrin carbon sticks. Please understand beforehand that it can not be returned or exchanged due to the difference between the photograph and the actual color. Length Weight Thickness Approximately 30 cm Approximately 56 g Approximately 8 mm

The length of the stick is the shortest 30 cm calculated to increase the operability of a technique requiring advanced and delicate operation such as three windmills, without adding unnecessary power to Diabolo. Thickness is also slightly thinner than other company's carbon stick. And it is lighter than the previous Ferrin carbon stick, and the balance of the stability accompanying it is supported by the weight of the tip of the sponge. By placing the weight balance on the sponge side, the operability of the release system (the technique of separating the stick from hand) has dramatically increased. The ease of the Taiwanese dynamic release is outstanding. It also reduces the burden on the arms that it takes to handle Diabolo because it is a lightweight stick. It is a stick to recommend to children and women, those who are challenged by Diabolo from now on.

It is an intermediate size carbon stick which was made according to the requests from the jugglers. We use carbon of the same Φ 8 as 35 cm carbon stick and we use hand grips with intermediate size of Φ 7, 30 cm and Φ 8, 35 cm. The surface of the stick has very little friction and is ideal for grinding skill. It is a hand stick that we can recommend to anyone from beginner to advanced. Length Weight Thickness Approx 32 cm Approx 64 g Approx 8 mm Available colors : Black, White

It is the highest grade carbon stick boasting durability over the conventional carbon type by its own recipe that involves making carbon by involving many carbons.

It improves vertical cracking of carbon which could not be prevented by hard exercise etc, and from the sturdy construction, there is almost no bending and stable play is possible.

The surface of the stick has very little friction and is ideal for grinding skill. It is a hand stick that you can recommend to anyone from beginner to advanced.

Length: Approximately 35 cm. Weight: About 65 g, Thickness: Approx 8 mm

It is a wooden hand stick. The ingenuity of the joining part between the tip part of the stick and the stringer has been tampered with, so you can easily replace it. It is a hand stick recommended for those who start Diabolo now and for children. About 36 cm in length Weight Approximately 63 g Thickness Approximately 14 mm In the case of Length Weight Thickness About 36 cm role 63 g Approx 14 mm

It is the plastic hand stick best for integral. Because the string comes out from the tip, it is easy to handle, we recommend it for beginners, from the inexpensive aspect compared to the carbon stick. A fine groove is attached to the tip of the stick, and it plays a role of slip prevention in the case of a trick such as stopover. The third image will be a comparison image of 31 cm stick and 27 cm stick. ※ Because this product is made of plastic, the strength is inferior compared with the carbon stick. Please be aware that it may break if you give strong impact ※ The attached string will be non-friction strings, but there are times when Feirin strings are included depending on arrival time, color. ※ Orange will be 27 cm only. Length Weight Diameter Approx 31 cm approx 73 g 8 mm

Ryo Yabe Design latest work, Diabolo "Evolution G2 Plus" . Diabolo of Sandia Company was generally the greatest strength of the original multistep accelerator (hybrid accelerator etc.) to make ease of use, but the accelerator occupied about 1/3 of the cost of Diabolo. This time we made it with general accelerator shape, developed based on the concept of cost reduction and pursuit of ease of use at the same time. Especially for the surface processing of the accelerator because it is simple, we are finished inferior to the hybrid accelerator quality inferior. ※ The sixth piece of photograph will be an enlarged photograph of normal accelerator. There is a case that the centrifugal force becomes an obstacle for the top-ranking person who handles three or more Diabolo at the same time. It is because it is heavy because of the centrifugal force of a circle such as a wind mill and it becomes difficult to control. Evolution Diabolo does not rely on centrifugal force, we are making it based on the concept of decreasing the friction that occurs when strings and sticks hits the cup to the utmost limit and sustaining rotation. We designed the thickness of the cup slightly thicker than Evolution G2 to increase the centrifugal force to such an extent that it does not become a burden. Although it is a slight difference in appearance, it is finished in an exquisite balance that can achieve both rotational force and operability. By replacing it with a weight rim for Evolution Diabolo which started selling newly, it is possible to make a total of 16 g heavier and further increase the centrifugal force. Moreover, by exchanging for the metal washer light, total 6 g becomes heavier than the nut embedded type washer, and the total of 12 g can be lighter than the conventional metal washer. You can customize it to the play style that suits yourself, so just try it.

Ryo Yabe Design latest creation - Diabolo "Evolution G2 Plus". There is a case that the centrifugal force becomes an obstacle for the top-ranking person who handles three or more Diabolo at the same time. It is because it is heavy because of the centrifugal force of a circle such as a wind mill and it becomes difficult to control. Evolution Diabolo does not rely on centrifugal force, we are making it based on the concept of decreasing the friction that occurs when strings and sticks hits the cup to the utmost limit and sustaining rotation. We designed the thickness of the cup slightly thicker than Evolution G2 to increase the centrifugal force to such an extent that it does not become a burden. Although it is a slight difference in appearance, it is finished in an exquisite balance that can achieve both rotational force and operability. By replacing it with a weight rim for Evolution Diabolo which started selling newly, it is possible to make a total of 16 g heavier and further increase the centrifugal force. Moreover, by exchanging for the metal washer light, total 6 g becomes heavier than the nut embedded type washer, and the total of 12 g can be lighter than the conventional metal washer. You can customize it to the play style that suits yourself, so please try it.

This is Diabolo which coalesced Chinese sesame and Diabolo. Traditional Chinese sesame seeds cup is wooden or rigid plastics are usualy very hard and dangerous, but you can safely juggle by covering it with a diabolo cup. There is a whistling sound at high speed rotation.

From January 2016, the inner for normal accelerator will change from clear color to smoke black color. A long-awaited new work, produced by Ryo Yabe Produce Diabolo 7th "Soaring"! Diabolo of Sandia Company was generally the greatest strength of the original multistep accelerator (hybrid accelerator etc.) to make ease of use, but the accelerator occupied about 1/3 of the cost of Diabolo. This time we made it with general accelerator shape, developed based on the concept of cost reduction and pursuit of ease of use at the same time. Especially for the surface processing of the accelerator because it is simple, we are finished inferior to the hybrid accelerator quality inferior. ※ The third piece of photograph will be an enlarged photograph of normal accelerator.

From January 2016, the inner for normal accelerator will change from clear color to smoke black color. A long-awaited new work, produced by Ryo Yabe Diabolo 7th "Soaring"! Made in Japan

A long-awaited new work, produced by Ryo Yabe Produce Diabolo 7th "Soaring"! Diabolo of Sandia Company was generally the greatest strength of the original multistep accelerator (hybrid accelerator etc.) to make ease of use, but the accelerator occupied about 1/3 of the cost of Diabolo. This time we made it with general accelerator shape, developed based on the concept of cost reduction and pursuit of ease of use at the same time. Especially for the surface processing of the accelerator because it is simple, we are finished inferior to the hybrid accelerator quality inferior. ※ The second piece of photograph will be an enlarged photograph of normal accelerator. Soarin is a diabolo that combines the features of two diabolos below. · Feeling less inclined "Feilin", less blurring features · Characteristic scratch-resistant feature of "Xiaolin" In addition, SOARIN releases two types of soft type and hard type. The material of Diabolo inherently changes hardness depending on the temperature. Depending on the temperature or your preference, you can choose from two types. In this hard type, the cup does not become too soft even in the hot summer season, and the blur is reduced. As with the Ferrin inner, because it uses a type to fix firmly in the cup, it is harder to shake compared to Xiaolin. Please try out Diarboro "Soaring" of expectation which took off a good diabolo so far!

A long-awaited new work, produced by Ryo Yabe Produce Diabolo 7th "Soaring"! Soarin is a diabolo that combines the features of two diabolos below. · Feeling less inclined "Feilin", less blurring features · Characteristic scratch-resistant feature of "Xiaolin" In addition, SOARIN releases two types of soft type and hard type. The material of Diabolo inherently changes hardness depending on the temperature. Depending on the temperature or your preference, you can choose from two types. In this hard type, the cup does not become too soft even in the hot summer season, and the blur is reduced. As with the Ferrin inner, because it uses a type to fix firmly in the cup, it is harder to shake compared to Xiaolin. Please try out Diarboro "Soaring" of expectation which took off a good diabolo so far!

A long-awaited new work, produced by Ryo Yabe Produce Diabolo 7th "Soaring"! Soarin is a diabolo that combines the features of two diabolos below. · Feeling less inclined "Feilin", less blurring features · Characteristic scratch-resistant feature of "Xiaolin" In addition, SOARIN releases two types of soft type and hard type. The material of Diabolo inherently changes hardness depending on the temperature. Depending on the temperature or your preference, you can choose from two types. This soft type has a soft feel, the risk of dropping it or hitting your body by any chance is low. Also, the cup maintains moderate softness during cold weather in winter, and the shake is reduced. As with the Ferrin inner, because it uses a type to fix firmly in the cup, it is harder to shake compared to Xiaolin.

At first glance it looks like a small diabolo for children, but it is Diabolo that I recommend to advanced users who play with three or more. By keeping the diameter of Diabolo at about the same height as Diabolo of normal size, by reducing only the diameter, turning is handy when dealing with multiple diabolos, demonstrating outstanding performance. Because it uses the same material as Soaring and Xiaolin, it is hard to get scratched. It is excellent in cost performance, I am also recommended for beginners, small children. The images 3rd and 4th are compared with soarin and size comparison image.

Yabe Ryo Produce Diabolo's sixth "Mini Diabolo"! It is very small, it is Diabolo which seemingly looks like a toy, but it is Diabolo which can be used firmly. Because it has small small air resistance, it can do higher tortoise than ordinary Diaboro, and it demonstrates its power in outdoor performance. The second and third photographs are comparative images of the size with normal Xiaolin.

This diabolo is specifically for advanced users who can handle multiple diabolos. The greatest feature of genufourin is that the edge of the cup is thin and it is designed to make it difficult for centrifugal force to hang. Diavolo which is difficult to receive centrifugal force has no sustaining power of rotation, but it feels very light with the bodily sensation, it is easier to control, more delicate control is possible. In addition, the inner is adopting the Faylin inner, making it less inclined. Thanks to these effects, it is the perfect diabolo for exercises of three wind mill systems. The material of the cup is made of stone-based material which is hard to bear big scratches even when used outdoors, it is made more rigid, the friction of the cup is also less, the stick hitting stick reduces the reduction of rotation to the utmost limit when correcting the inclination .

From August 2017, we improved inner parts and adopted lock parts. Durability has improved dramatically. Since conventional double ball bearings were fitted with inner ball bearings by press fitting, due to the impact of the fall and the degree of tightening of the nut, the inner ball bearing entered deep, causing resistance to occur . We solved this problem, by adopting a flanged one (photo 8th) on the inner ball bearing. In addition, there was a problem that the inner metal part was easy to lose when a strong shock was applied, but this problem was solved by adopting metal of different material. Made in Japan

It is a Russian Ball that has a matte finish on the ball surface. It is not too soft and not too hard, pursuing the best hardness that is hard to be influenced by atmospheric pressure even during the winter season. Because it is matt finish, balls are difficult to stick together, and it is suitable for multiplex and Russian cascades. The size is 75 mm, the most popular of Russian balls. We are specs that can be used from beginner to professional together for price, quality, please try by all means. ★ About color The actual color may differ from the photograph. Please understand beforehand that returned or exchanged due to difference in color after ordering can not be accepted. Diameter 75 mm Weight 100 g

The Legend of the juggling world "Anthony Gato" Length Weight 48.3 cm About 230 g

It is the highest-grade model which applied semi-transparent silver vacuum deposition inside the soaring cup. Unlike ordinary vacuum deposition, vapor deposition does not peel off when the material deforms We adopt state-of-the-art technology which could not be thought with common sense until now. By installing the LED kit, the light reflects on the cup and enables the production of strong light. Hand stick is not included. Please purchase separately. Since there is a danger of discoloration by ultraviolet rays, we recommend storing in a place not exposed to sunlight.

For sale in high quality starter diabolo 20 or 30 pieces set for workshop. Diabolo and wooden hand stick are also set. The color is red, blue, yellow, green, orange. Four each. There are also 30 sets each 6 colors each. ※ If you wish, you can buy set of 20 or 30 diabolos Diameter 125 mm Height 143 mm Weight 235 g

It is a plastic tape used for repairing and decorating juggling tools. When sticking a vinyl tape while stretching it stretches out as time goes on, it sticks out, but plastic tape is the biggest feature that it hardly shrinks and sticks even if stuck while stretching.

It is a plastic tape used for repairing and decorating juggling tools. When sticking a vinyl tape while stretching it stretches out as time goes on, it sticks out, but plastic tape is the biggest feature that it hardly shrinks and sticks even if stuck while stretching.

It is a plastic tape used for repairing and decorating juggling tools. When sticking a vinyl tape while stretching it stretches out as time goes on, it sticks out, but plastic tape is the biggest feature that it hardly shrinks and sticks even if stuck while stretching. It is the best size for club trim and devil stick center with a size of 12.7 mm which is not available in Japan.

It is a plastic tape used for repairing and decorating juggling tools. When sticking a vinyl tape while stretching it stretches out as time goes on, it sticks out, but plastic tape is the biggest feature that it hardly shrinks and sticks even if stuck while stretching. It is the best size for club trim and devil stick center with a size of 12.7 mm which is not available in Japan.

It is friction sticker for DUNCAN original hard core series. Friction sticker is a consumable item. Also, even if it is made by another company's yo-yo, returning will be improved by sticking this sticker when return is not good.

It is a yo-yo for looping play. Adopt ball bearing accelerator and friction sticker return system. For this reason, very stable play is possible. If you use thick enclosed replacement spacer, you can also play a simple string trick.

It is a yo-yo for looping play. Adopt ball bearing accelerator and friction sticker return system. For this reason, very stable play is possible. If you use thick enclosed replacement spacer, you can also play a simple string trick.

It is a yo-yo for looping play. Adopt ball bearing accelerator and friction sticker return system. For this reason, very stable play is possible. If you use thick enclosed replacement spacer, you can also play a simple string trick.

It is a yo-yo for looping play. Adopt ball bearing accelerator and friction sticker return system. For this reason, very stable play is possible. If you use thick enclosed replacement spacer, you can also play a simple string trick.

From the Hyper Yo-Yos series, Duncan brand, the second "Wind Orbit" is newly released! Three types of colors are available: clear, blue and green! With the looping sticker function, the yo-yo's return has been enhanced remarkably, and the looping performance has been improved drastically by the combination of a round body that is easy to grasp! It's a high-class looping play model boasting high turning power!

From the Hyper Yo-Yos series, Duncan brand, the second "Wind Orbit" is newly released! Three types of colors are available: clear, blue and green! With the looping sticker function, the yo-yo's return has been enhanced remarkably, and the looping performance has been improved drastically by the combination of a round body that is easy to grasp! It's a high-class looping play model boasting high turning power!

From the Hyper Yo-Yos series, Duncan brand, the second "Wind Orbit" is newly released! Three types of colors are available: clear, blue and green! With the looping sticker function, the yo-yo's return has been enhanced remarkably, and the looping performance has been improved drastically by the combination of a round body that is easy to grasp! It's a high-class looping play model boasting high turning power!

It is a charger common to K8 companies' glow balls, glow clubs and glow devil sticks. The photo will be for 5 pieces, but we will be preparing for 3 pieces. * Please purchase the USB adapter from the household power supply separately at home electronics mass merchandisers and so on.

It is a remote control that is shared by K8 companies' glow balls, glow clubs and glow devil sticks. Remote control distance is up to 3 m. One battery is CR2025.

It is a glow devil stick released by K8 company. Various colors can be changed using a dedicated remote control. * Charger, remote control are sold separately. Please purchase from here . Hand stick is also sold separately. Please purchase from here . Length 67.8 cm Weight 320 g.

New color white sale started. Rudd Factor It is a set of original dish-set. Since the main body is made of plastic, it does not break even if it is dropped, and it does not hurt even if you touch the body. Easy to turn even for beginners, it is easier for the bars to catch on the bottom of the plate. It is a set of dishes + plastic stick. Plate size: W 23.8 x H 23.8 cm Stick size: W 8 mm x H 50 cm.

It is 27 meters of the side-tape of the highest quality cloth which is hard to stick corresponding to all cigar boxes including RF plastic cigar box. Color is white only Size is only 25 mm wide. Since it is size expansion only of width 25 mm, please cut vertically to the thin tape part and use it. When using a thin tape part vertically cut into the RF plastic cigar box, it becomes about 24 cigar boxes.

Cigar box player - A long-awaited Radfactor original, "RF Plastic Cigar Box" We spent enormous time of three years, finally reaching sales. as there were many requests from players, we switched to a more difficult integral molding design and started making the work again from a review of previous production. Although integral molding is outstanding in durability, there was a very big problem of deformation due to shrinkage after releasing, but with our repeated research, we created a perfect formula that is less likely to cause deformation. We produce it with high accuracy.

Cigar box - a long-awaited Radfactor original, "RF Plastic Cigar Box"

IN STOCK

At the beginning of the production we fixed the panel with a disassembling formula to fix the panel color freely, but since the impact is concentrated on the part of the screw stopper at the time of falling, there is a problem in durability we was abandoning production.

However, as there were many requests from jugglers, we switched to a more difficult integral molding design and started making the work again from a review of production.

Although integral molding is outstanding in durability, there was a very big problem of deformation due to shrinkage after releasing, but repeated researching process, creating a perfect formulation that is less likely to cause deformation, and not considered to be made of plastic It is finished with accuracy.

This "carbon fiber handstick" is the one that I recommend especially among the four lineups, "hand stick for RF original devil stick" "beach" "glass fiber" "glass fiber plus (FRC)" "carbon fiber". By adopting the carbon fiber which became the classic in the diabolo hand stick now as the core of the hand stick for the devil stick which had never existed, we realized "weight reduction, durability, ease of use" exceeding the FRC In addition to that, the ultimate hand stick combining the pleasantness of hit feeling with hitting peculiar to carbon was born. It is expensive compared to other hand sticks because it uses high-grade carbon fiber, but you can experience the spec that surpasses the price and the unique feeling of use that transcends the handsticks ever. Please try Supernova "Carbon Fiber Handstick" which can be the new standard of the next hand stick by all means.

It is RF original "glass fiber plus hand stick" which adopted high-grade silicon tube with high grip power using FRC as the core. Mixing materials realizes high strength while being thin. As a big point of the item it is possible to choose the length and the thickness according to the play style. We prepared a standard length of 49 cm and a longer 51 cm, slim according to the normal and recent trends in thickness.

It is RF original "glass fiber hand stick" which adopted high-grade silicon tube with high grip power by using glass fiber as the core. It is the heaviest in the line-up of the devil stick dedicated hand stick, which is superior in techniques such as throwing hand stick during play, turning, etc. It is made thicker than "fiberglass plus (FRC)" "carbon fiber" It is best for those who prefer stiff sticks because it is being done. Moreover, we also recommend it to those who are looking for a handy stick that is more cost effective and less expensive than wooden. As an intermediate rank of hand stick, please recommend "glass fiber hand stick" recommended especially for beginners to intermediate users by all means.

It is a long devil stick specialized for dual devil stick (technique to control two at the same time). Depending on the length, you can idle with a slow rhythm, so it is ideal for dual idling practice. The long devil stick that moves a lot in a row is impressive in the stage. Since SUNDIA devil stick has become a finish of one piece without joint, it is excellent in durability. Slightly heavy weight (about 220 ~ 270 g) allows stable play without being swept by the wind. * We have published a comparison image on the 3rd photo photo. Please try by all means.

Fill the wick (cloth) at both ends with fuel and use it with a fire. The flames at both ends draw a beautiful trajectory in the dark. Please try Fire Devil Stick shining in the show. All with silicone hand stick. Length : About 70.5 cm Weight: 280gr

It is a distinctive shaped devil stick made by a long-established English juggling brand "Beard". It is a feature devil stick that the end rubber has big bulging. Moreover, it is made relatively thick compared with other devil sticks. Length : About 66 cm Weight : 170g～230g

It is the ultimate devil stick using paper for the material supervised by Juggler Tenpyo. People who know it is a paper devil stick, but it has finally reached commercialization as a result of repeated adjustments. We stick to the core rod, we use carefully selected luxury wood and finish it in a condition without any blur. Also, because the paper absorbs the shock, the striking sound is very quiet than the usual devil stick We now have. End rubber can be changed to white, red . When you wish, thank you to fill in the remarks column. Length 70.5 cm - Weight about 260 g - 275 g Length 72.5 cm - Weight About 265 g - 280 g Length 77.5 cm - Weight About 280 g - 290 g

It is the ultimate devil stick using paper for the material supervised by Juggler Tenpyo. People who know it is a paper devil stick, but it has finally reached commercialization as a result of repeated adjustments. By using glass fiber for the core rod, in addition to successful weight reduction of the center stick, there is no weight variation like wood. Moreover, the end rubber was greatly improved from the conventional one, and durability was dramatically improved. As a result, the total length is about 1 cm longer than the conventional one. Because the paper absorbs the shock, the striking sound is very quiet than the usual devil stick.

TEX glass fiber core, TEX wood core corresponding to repair. End rubber. It does not correspond to the TEX devil stick before the end of August 2015. If you are use in older TEX here Please purchase the end rubber. It will be sold in units of 1 piece. (Two are required for one devil stick.) Height About 23 mm Diameter of hole about 15 mm.

PLAY Devil stick Repair end rubber will be sold in 1 piece unit. (Two are required for one devil stick.)

It is a big hit product PX3 club of Italian juggling manufacturer "PLAY". The characteristic of this club is that the material of the core is not a tree but a flexible polyvinyl chloride pipe is used and it is durable enough to say that it will not break even if you stepped on by mistake by mistake I have it. Moreover, the knob, the head is made of the material called thermoplastic, it becomes hard to wear. Handles are very thin compared to clubs of other companies, so you can have as many clubs as you can, so it is also highly recommended when practicing numbers such as 5 clubs and 7 clubs. The decoration is not a hologram sticker, but it is in the state of printing a hologram with the technique of vacuum evaporation. Therefore, it prevents the club from becoming heavy by decoration, and has succeeded in weight reduction.

Swiss brand, Mr. Babash is exclusively developed for the Czech club juggler "Mario Bersek", it is a club that is easy to throw at high speed. In order to specialize in Mario · Bersek's club's high-speed spinning and throwing style, it is slightly shorter than a normal club to make the head slender. The weight is 200 g and it is lighter than regular clubs. Knobs and head rubber at both ends of the club use rubber with a hollow inside and it is excellent in durability. Because thin heads are hard to bump in the air, it is also recommended for numbers and clubs with 4 and 5 clubs. Length 50 cm Maximum diameter 65 mm Weight Approximately 200 g The adhesive strength of the decoration seal used for the joint between the head and the handle with the red circle of the second image is weak, making it easy to peel off. Please paste a transparent tape from above and reinforce it.

It is a ring with a hologram sheet sticking glittering and beautifully on the ring surface. By coating the hologram sheet with a thin transparent resin by a special construction method, it is more difficult to scrape than to paste it normally, but please note that it will be cut off if it falls to the ground etc. The thickness, shape and weight are exactly the same as the traditional standard rings and are very easy to throw, and the edges are also rounded. The material is made of plastic. Full is a ring with hologram processing on both sides. You can choose from four kinds of holograms: silver, orange, green and purple. Click here for "Reversible" where hologram processing was applied only on one side. Diameter of about 32.4 cm Thickness of about 3.4 mm Weight Approximately 103 g.

Alongside the ball and club, the basic item of Toss juggling is "Ring". Because there are few collisions in the air and easy to catch, the world record of many Toss juggling is born in this "ring". In addition, there are many means of expression that are impossible with balls and clubs, such as rolling the body or turning with the fingertips, beautiful and beautiful juggling performance is being created every day. Durability, edge roundness, as well as sticking to coloring, I used Pantone's neon color. It is an Rad Factor juggling rings. Please try. Made in Japan Diameter of about 32.4 cm Thickness of about 3.7 mm Weight Approximately 100 g.

It is a ball that you can use for versatile purposes that is popular with overseas famous jugglers. This type of balls mainly used in Russia for Toss juggling.

It is a ball for head bounce (heading) which is popular within overseas famous jugglers. Besides head bounce, it can also be used for tossing, body rolling, ball spinning,etc. The ball is made of rubber and has a special coating on the surface, it is very bright. Difficult to stain or scratch

It is a ball whose Russian ball premium has been molded thicker. There is no deformation due to barometric pressure, which is a drawback of Russian balls, nor dent in throwing out. It is harder to break than ordinary Russian balls, so you can use it longer. The hardness is about half the hardness between Russian Ball Premium and Hard Russian Ball (Ukraine Ball). Russian Ball Premium, which became a popular item of the Lad Factor in an instant. By making detailed meetings at factories in Japan, it was finished in the ultimate Russian ball. - We did not use the ball of the ball pool, we made it from the mold. - It was not too soft and not too hard, pursuing the best hardness which is hard to be influenced by atmospheric pressure even during the winter season. · The problem of sliding surface which tends to be on Russian balls was solved by daringly producing the condition of gloss on the surface of the ball. · It sticks to paint, it is good coloring excellence even in RF products. · Although domestic products are expensive, they realized an affordable price through mass production. Because it is a simple Russian ball, I stick to details. Please try RF best masterpiece by all means.

It is a ball whose Russian ball premium has been molded thicker. There is no deformation due to barometric pressure, which is a drawback of Russian balls, nor dent in throwing out. It is harder to break than ordinary Russian balls, so you can use it longer. The hardness is about half the hardness between Russian Ball Premium and Hard Russian Ball (Ukraine Ball).

It is a Russian ball which has a matte finish on the ball surface. It is not too soft and not too hard, pursuing the best hardness which is hard to be influenced by atmospheric pressure even during the winter season. Because it is matt finished, it is difficult for balls to stick together, and it is suitable for multiplex or Russian cascade. The size is the most popular 75mm in Russian ball. We are specs that you can use from price to quality, both beginners and professionals so please try by all means. ★ About color Pictures may differ from actual colors. Please understand beforehand that returns / exchanges due to differences in color after ordering can not be accepted. Diameter 75 mm Weight 100 g

It is an oversized Russian Ball with a diameter of 100 mm. It is noticeable at the stage and show. The ball uses the same material as the Russian Ball premium and the contents are finished lightly with 120 g while maintaining the balance as Russian ball by using microbeads.

By making detailed meetings at factories in Japan, it was finished in the ultimate Russian ball. - We did not use the ball of the ball pool, we made it from the mold. - It was not too soft and not too hard, pursuing the best hardness which is hard to be influenced by atmospheric pressure even during the winter season. - The problem of sliding surface which tends to be on Russian balls was solved by daringly producing the condition of gloss on the surface of the ball. - It sticks to paint, it is good coloring excellence even in RF products. - Although domestic products are expensive, they realized an affordable price through mass production. Because it is a simple Russian ball, I stick to details. Please try RF best masterpiece by all means.

From February 2015, the color of pearl white has been changed. We have changed from conventional bluish light to pinkish light. Please note those who purchase additional.

Russian Ball Premium, which became a popular item of the Lad Factor in an instant. By making detailed meetings at factories in Japan, it was finished in the ultimate Russian ball. - We did not use the ball of the ball pool, we made it from the mold. - It was not too soft and not too hard, pursuing the best hardness which is hard to be influenced by atmospheric pressure even during the winter season. - The problem of sliding surface which tends to be on Russian balls was solved by daringly producing the condition of gloss on the surface of the ball. - It sticks to paint, it is good coloring excellence even in RF products. - Although domestic products are expensive, they realized an affordable price through mass production. Because it is a simple Russian ball, I stick to details. Please try RF best masterpiece by all means.

Russian Ball Premium, which became a popular item of the Lad Factor in an instant. By making detailed meetings at factories in Japan, it was finished in the ultimate Russian ball.

We produce it with precision and quality at factories in Japan, and we created the ultimate Russian ball. Russian Ball Premium, which became a popular item of the Lad Factor in an instant. By making detailed meetings at factories in Japan, it was finished in the ultimate Russian ball. - We did not use the ball of the ball pool, we made it from the mold. - It was not too soft and not too hard, pursuing the best hardness which is hard to be influenced by atmospheric pressure even during the winter season. · The problem of sliding surface which tends to be on Russian balls was solved by daringly producing the condition of gloss on the surface of the ball. · It sticks to paint, it is good coloring excellence even in RF products. · Although domestic products are expensive, they realized an affordable price through mass production. Because it is a simple Russian ball, I stick to details. Please try RF best masterpiece by all means. Weight : About 95 g diameter: about 72 mm

Russian Ball Premium, which became a popular item of the Lad Factor in an instant. By making detailed meetings at factories in Japan, it was finished in the ultimate Russian ball. - We did not use the ball of the ball pool, we made it from the mold. - It was not too soft and not too hard, pursuing the best hardness which is hard to be influenced by atmospheric pressure even during the winter season. - The problem of sliding surface which tends to be on Russian balls was solved by daringly producing the condition of gloss on the surface of the ball. - It sticks to paint, it is good coloring excellence even in RF products. - Although domestic products are expensive, they realized an affordable price through mass production. Because it is a simple Russian ball, I stick to details. Please try RF best masterpiece by all means.

Russian Ball Premium, which became a popular item of the Rad Factor in an instant. After making detailed meetings at factories in Japan, it become an ultimate Russian ball with Japanese quality. The Rad factor Russian ball is the best ball on the market for jugglers. The shell are soft but not too soft or thin to be affected by altitude or heat changes. The texture isn't sticky and feels very nice in hand, not slippery and very smooth when released from one hand in in multiball juggling. There is a flush plug in the ball, and the whole ball has an even texture and feel, with no exposed or raised plug. Made In Japan. The 65mm size is made for number juggling, or juggler under 5 feet tall. - We made it from the mold. - It is not too soft and not too hard, pursuing the best hardness which is hard to be influenced by atmospheric pressure even during the winter season. - The problem of sliding surface which tends to be on Russian balls was solved by daringly producing the condition of gloss on the surface of the ball. - It sticks to paint, it is good coloring excellence even in Rad Factor products. - Although domestic products are expensive, they realized an affordable price through mass production. Because it is a simple Russian ball, I stick to details. Please try Rad Factor best masterpiece by all means.

Ryo Yabe is actually using it at the show, we have completed a long-awaited stabilizer bearings for Top Diabolo players who had a lot of inquiries. Stabilizer Bearing is a rod that is attached to the threaded portion with extension. And it is the RF original part with the ball bearing on the other side. By attaching this it is possible to lift the top diabolo directly from above and it is possible to easily carry out the technique to put on the arms and feet. The inclination correction can also be done easily. I also stick to the material. It is a part which touches directly with the hand There are all the parts, I use stainless steel made of pure Japanese which is rust resistant and highly durable. If stabilizer bearings are available, the variations of the technique will be dramatically increased, and top diabolo can be played many times fun. It is possible to attach to all Diabolos except top diabolo as well as starter Faylin. In that case you will need two on the left and right.

It is a Diabolo with five bearings with specifications exceeding "Sun Valley" . Since the structure of the Sun Valley (triple bearing) is to form a gap between the inner and the accelerator, when the Diabolo is inclined even a little, the accelerator moves back and forth, which causes resistance and it becomes a factor to decelerate the rotation It was. As a result of repeated research to solve this problem, it is possible to design without creating a gap by using a "double bearing structure" in which ball bearings are further embedded in ball bearings, and even if the bearing generates resistance in some form Even then, another bearing is assisting, and resistance is not generated at all angles. Bearing Diabolo with extremely high operability has been completed. Form inherits from Evolution Diabolo, it suppresses the reduction of rotation when the string touches the inner so that it is hard to tilt. When installing an optional LED kit, light comes out of the transparent part, and directs a very fantastic shine.

"Soaringin hard type", "Sun Byrin Axel" was loaded! With the sun by-a-ring axle, one ball bearing is built into each side of the one-way clutch bearing, making it possible to keep the rotation long by surprisingly by reducing the friction to the limit. Also, compared with conventional rotary bearing accelerator, it is designed to be wider by 5 mm, so the nickname of grinding tricks making full use of rotating sustaining power is outstanding. Although it costs a little more than other Diaboro, beginners are Diabolo which can learn Diabolo most easily. Made in Japan

Soft type, hard type was sold, but due to the manufacturer's intention since February 2013, the crystal color is slightly harder in the cup, the color is usually normal, the marble color is changed to soft ones. "Genufurin" is a Diabolo boasting the ultimate turning power which carried "Saint-Billin Axel"! With the sun by-a-ring axle, one ball bearing is built into each side of the one-way clutch bearing, making it possible to keep the rotation long by surprisingly by reducing the friction to the limit. Also, compared with conventional rotary bearing accelerator, it is designed to be wider by 5 mm, so the nickname of grinding tricks making full use of rotating sustaining power is outstanding. Although it costs a little more than other Diaboro, beginners are Diabolo which can learn Diabolo most easily. Please try this Diabolo we can recommend it to any level - from inexperienced to advanced. Made in Japan

We reduced the price to the limit by using the normal sunlightin accelerator for the starter diabolo cup. On each side of the one-way clutch bearing, one ball bearing is built in each and one can keep surprisingly long rotation by reducing the friction to the limit. Also, compared with conventional rotary bearing accelerator, it is designed to be wider by 5 mm, so the nickname of grinding tricks making full use of rotating sustaining power is outstanding. It is this San Bylin Diabolo that beginners can learn Diabolo most easily. Please try Diabolo which you can recommend to any level from inexperienced to advanced.

Beginning in April 2015, we changed it to be used with white bearings. With hints from traditional Japanese music, a new solo piece, which evolved as a new shape while taking advantage of the characteristics of traditional Diabolo, was completed. The basic way of playing is to turn the axis perpendicular to the ground and rotate like a Japanese solo piece. In addition, you can combine a combination with Diabolo's horizontal turn (Horizon) as well as putting the rotating top diabolo on the palm or the arm, and you can make a pattern of a new technique that has never existed. Moreover, by installing the stabilizer bearing, the range of the technique further widens. A stabilizer bearing is an RF original part with a ball bearing attached to the end of a rod that is attached to the screw part by extension. By attaching this, it is possible to lift the top diabolo directly from above, it is possible to easily carry out skills that can be placed on arms and feet, and tilt correction. Please try by all means. Diameter 125 mm Height 125 mm Weight Approximately 225 g

In the beginning of April 2015, we changed it to be used with white bearings.

With hints from traditional Japanese music, a new solo piece, which evolved as a new shape while taking advantage of the characteristics of traditional Diabolo, was completed.

The basic way of playing is to turn the axis perpendicular to the ground and rotate like a Japanese solo piece. In addition, you can combine a combination with Diabolo's horizontal turn (Horizon) as well as putting the rotating top diabolo on the palm or the arm, and you can make a pattern of a new technique that has never existed.

Moreover, by installing the stabilizer bearing, the range of the technique further widens. A stabilizer bearing is an RF original part with a ball bearing attached to the end of a rod that is attached to the screw part by extension.

By attaching this, it is possible to lift the top diabolo directly from above, it is possible to easily carry out skills that can be placed on arms and feet, and tilt correction.

Diabolo Standard Equipment: Bearing Nut, Internal Tooth Washer, Metal Washer, Inner for Bearing, Metal Mini Washer, Rotating Bearing Normal Accelerator, Top Diabolo Tip Parts, Ferrin Cup Diameter 125 mm Height 125 mm Weight Approximately 220 g

The shade changes and Xiaolin light re-arrives! Even children and women, light type of "Xiaolin" appeared so that you can play without straining your arms. Both balance of weight and coloring, compatibility with "LED light" is increasing.

Rad Factor Diabolo "Shaolin" which many customers have favorite among Diabolos made by the Rad Factor. We especially recommend this diabolo to beginners and intermediate users. The following points can be cited as a reason for recommending. - There is heavy weight, you can practice while feeling the weight of Diabolo firmly. (If it is too light, the feeling will be fluffy and the technique will become difficult to stain on the body.) · Depending on the inner shape, diabolo is easy to tilt, it is easy to straighten the tilt. (If you do not manipulate diabolo straight, it will lean, so I will acquire the correct form.) (It will also be practice of recovery to make it easy to straighten the tilt with strings while doing the technique.) · Even if the condition of the practice place is bad, such as on asphalt, it is difficult to scratch diabolo at the time of falling Please try "Shaolin" which can raise Diabolo's skills efficiently. Made in Japan

It is Diarboro "Shaolin" which many customers have favorite among Diabolo handled with the lad factor. We especially recommend this diabolo to beginners and intermediate users. The following points can be cited as a reason for recommending. - There is heavy weight, you can practice while feeling the weight of Diabolo firmly. (If it is too light, the feeling will be fluffy and the technique will become difficult to stain on the body.) · Depending on the inner shape, diabolo is easy to tilt, it is easy to straighten the tilt. (If you do not manipulate diabolo straight, it will lean, so I will acquire the correct form.) (It will also be practice of recovery to make it easy to straighten the tilt with strings while doing the technique.) · Even if the condition of the practice place is bad, such as on asphalt, it is difficult to scratch diabolo at the time of falling Please try "Shaolin" which can raise Diabolo's skills efficiently.

It is Diarboro "Shaolin" which many customers have favorite among Diabolo handled with the lad factor. We especially recommend this diabolo to beginners and intermediate users. The following points can be cited as a reason for recommending. - There is heavy weight, you can practice while feeling the weight of Diabolo firmly. (If it is too light, the feeling will be fluffy and the technique will become difficult to stain on the body.) · Depending on the inner shape, diabolo is easy to tilt, it is easy to straighten the tilt. (If you do not manipulate diabolo straight, it will lean, so I will acquire the correct form.) (It will also be practice of recovery to make it easy to straighten the tilt with strings while doing the technique.) · Even if the condition of the practice place is bad, such as on asphalt, it is difficult to scratch diabolo at the time of falling Please try "Shaolin" which can raise Diabolo's skills efficiently.

It is a diabolo equipped with ferrule, a rotary bearing (one way clutch bearing) that can only rotate in one direction. Compared to the normal type, it can be accelerated easily, and the rotating duration power is rising. It is Diaboro which can recommend to any level from inexperienced to advanced.

Ray Yabe, produced over many years of planning, and now the first Diarboro "FAILIN" is produced! It is designed to thicken the cup border, to make the center of Diabolo lightly so that centrifugal force is likely to be applied, and rotation is sustained. There is almost no blurring during rotation, and it will not deform at high speed acceleration. The rigid plastic cup has less friction on the surface and minimizes the deceleration of rotation which occurs when adjusting the inclination of diabolo with a stick. Because it bounces up firmly when falling, it is also suitable for bounce trick. It is Diabolo that you can recommend to any level from inexperienced to advanced.

Cirque du Soleil CIRQUE DU SOLEIL's diabolo set. Diabolo, hand stick, strings, instruction manual explained in 10 languages (including Japanese) will be attached.

Those who want to try Diabolo from now, those who are looking for Diabolo for beginners, especially among children and women who recommend Diabolo. Since Diabolo puts rotation in one direction, if you put a force on both hands during acceleration and move the cord, you can not give a strong rotation and the rotation will fall. This diabolo has a built-in one-way clutch bearing (a bearing which turns in only one direction), so unnecessary force is not applied even if putting force on both hands, so it has become possible to rotate easily It is Diabolo. Diabolo Standard Equipment: Bearing nut, Metal mini washer, Washer for bearing, Inner for bearing, Rotating bearing, Anodized aluminum bolt for bearing, Economy Faylin cup Diameter 125 mm Height 143 mm Weight Approximately 235 g