Wubalin G 2

From August 2017, we improved inner parts and adopted lock parts. Durability has improved dramatically. Beginning in July 2016, we strengthened inner parts and changed the structure of double ball bearings. Since conventional double ball bearings were fitted with inner ball bearings by press fitting, due to the impact of falling and the degree of tightening of the nut, the inner ball bearings entered deep, causing resistance to occur .

To solve this problem, this problem was solved by adopting a flanged one (photo 8th) on the inner ball bearing. In addition, there was a problem that the inner metal part was easy to lose when a strong shock was applied, but this problem was solved by adopting metal of different material.

Diabolo of spec that exceeds "Sun Valley" equipped with five bearings. This work reviewed the material selection of the cup from the beginning, and by adopting a hardening formulation based on Evolution G3 base, it improved to be able to withstand ultra high speed rotation.

Also, in the previous work, the rim, the inner was integrated, but changed to a split type, it is possible to limit the reduction of rotation when the string touches the inner limit to the limit.

In addition, we launched the following parts simultaneously with Wo violin G 2, we have customized according to your own play style. Weight rim for evolution

Metal Washer Light Since the structure of the Sun Valley (triple bearing) is to form a gap between the inner and the accelerator, when the Diabolo is inclined even a little, the accelerator moves back and forth, which causes resistance and it becomes a factor to decelerate the rotation It was.

As a result of repeated research to solve this problem, it is possible to design without creating a gap by using a "double bearing structure" in which ball bearings are further embedded in ball bearings, and even if the bearing generates resistance in some form Even then, another bearing is assisting, and resistance is not generated at all angles. Bearing Diabolo with extremely high operability has been completed.

※ The eighth piece of photograph is "double bearing structure".

★ About hand stick Hand stick is not included. Please purchase separately ★ For compatibility.

Please note that the bolts and the inner used for the previous work Evolution Wu Bai Lin are not compatible. (Double ball bearing, accelerator for wobbling can be specified.)

Also, when using other evolution cups, there is a gap between the rim and the body, the rim may turn around. Play and shake are not affected, but please be careful.

★ As to the direction of playing This diabolo is divided into black washer and white washer. When a right-handed person plays, please be sure to point the black washer to yourself.

★ About ball bearings To disassemble and assemble the Diabolo, please install the ball bearing with the flat side facing outward and the step side facing inward. If installed in the opposite direction, the bearing may be damaged.

Also, be careful if you tighten the nut too tightly, as the pressed bearing may come loose. ★ About durability and warranty.

The trick "Virtax (Excalibur)" which turns Diabolo in the vertical direction has a very strong shock applied at the time of falling, there is a possibility that even a brand new article will be damaged by only one fall. Please note that it will be out of the scope of initial failure, returned goods exchange guarantee in any case if it is damaged by falling with "Burtax".

As for the cup, sufficient strength is guaranteed so that the body will not be easily damaged by normal use method, but if it drops to a hard ground such as concrete in an extremely low temperature place, The body which can not bear temperature difference may be cracked. Please be careful in advance.

In the case of Diameter height weight (light trim) weight (weight limb) About 125 mm about 147 mm about 265 g about 282 g