Henry Woody cigar box glitter
$31.00
German long-established brand “Henries” made. There are still a lot of fans of wooden cigar boxes, especially those of old-fashioned players, with a solid weight feeling, a unique sound when sandwiching, and a wooden unique touching feeling.
Sales will be in 1 piece unit.
Boards of each side are bonded strongly by a locking structure, and it is the highest durability in a wooden cigar box. Wooden cigar boxes often make noise with wooden pieces in the boxes when used for a long time, but this issue has also been significantly improved as woody cigar boxes do not use pillars inside. It is also slightly thinner than the plastic cigar box and it is also recommended for those with smaller hands.
Vertical 12 cm Width 18 cm Height 6 cm Weight About 270 g – 320 g
Description
Reviews (0)
Shipping & Delivery
Related products
Beard cigar box
$28.00
It is a plastic cigar box made by British juggling manufacturer "Beard"
The main body part is made of plastic, and it is superior in durability as compared with a wooden cigar box.
The side sheet on the side uses a seat with high cushioning property, the feeling of grip is very high,
Moreover, it absorbs the impact sharply when pinching the boxes firmly.
Cigar box slide side tape 45 m
$23.00
Compared with ordinary side tapes, friction on the surface of the tape is small, so it is suitable for slide system skill.
A RFID plastic cigar box and other fabric tape side tapes corresponding to all cigar boxes are 45 m in length.
The size is 12.5 mm of narrow vertical use and 25 mm of thick used sideways.
When used in an RF Plastic cigar box, 12.5 mm is about 140 horizontal sides, 25 mm is about 115 vertical.
It is also possible to use 25 mm vertically cut in half. In that case it will be about 63 pieces.
Naranja plastic sigar box, box only
$29.00
It took three years from concept to production, after completed prototype trial production, we finally produce Naranja original domestic plastic cigar box.
★ Good deal! ★
• Same color 3 pieces 74 USD (about 6% OFF)
• Same color 5 pieces 140 USD (about 8% OFF)
• Same color case (24 pieces) 596 USD (about 15% OFF)
This product is a product that originally eliminated sides and side tapes necessary for cigar boxes. Ideal for creating original cigar boxes using favorite sides, tapes, etc. In addition, in order to use it as a normal cigar box, it is necessary to prepare side sheets and tapes separately. Please note. If you are requesting a finished product, please order from this page.
Premium side tape 25mm 27m roll for Cigar box custom
$46.00
It is 27 meters of the side-tape of the highest quality cloth which is hard to stick corresponding to all cigar boxes including RF plastic cigar box.
Color is white only Size is only 25 mm wide.
Since it is size expansion only of width 25 mm, please cut vertically to the thin tape part and use it.
When using a thin tape part vertically cut into the RF plastic cigar box, it becomes about 24 cigar boxes.
RF plastic cigar box body only
$31.00
Cigar box player - A long-awaited Radfactor original, "RF Plastic Cigar Box"
We spent enormous time of three years, finally reaching sales.
as there were many requests from players, we switched to a more difficult integral molding design and started making the work again from a review of previous production.
Although integral molding is outstanding in durability, there was a very big problem of deformation due to shrinkage after releasing, but with our repeated research, we created a perfect formula that is less likely to cause deformation. We produce it with high accuracy.
RF plastic cigar box side sheet
$4.00
Side replacement suede for RF plastic cigar box.
You can also use it for Henry Swordy cigar box.
The professional type eliminates the step between the main body and the side seats, improves grip feeling and operability.
It was made by supervision of Mr. JIN Japanese top player.
We also sell side tapes separately.
Top (half) diabolo (Please contact us for availability)
$0.00
In the beginning of April 2015, we changed it to be used with white bearings.
With hints from traditional Japanese music, a new solo piece, which evolved as a new shape while taking advantage of the characteristics of traditional Diabolo, was completed.
The basic way of playing is to turn the axis perpendicular to the ground and rotate like a Japanese solo piece. In addition, you can combine a combination with Diabolo's horizontal turn (Horizon) as well as putting the rotating top diabolo on the palm or the arm, and you can make a pattern of a new technique that has never existed.
Moreover, by installing the stabilizer bearing, the range of the technique further widens. A stabilizer bearing is an RF original part with a ball bearing attached to the end of a rod that is attached to the screw part by extension.
By attaching this, it is possible to lift the top diabolo directly from above, it is possible to easily carry out skills that can be placed on arms and feet, and tilt correction.
Diabolo Standard Equipment: Bearing Nut, Internal Tooth Washer, Metal Washer, Inner for Bearing, Metal Mini Washer, Rotating Bearing Normal Accelerator, Top Diabolo Tip Parts, Ferrin Cup Diameter 125 mm Height 125 mm Weight Approximately 220 g
Reviews
There are no reviews yet.