USB Rechargeable LED kit (both sides set)

The brightness of LED light, attached to Diabolo is increased.

The circular base incorporates three blue and three white two-color light-emitting diodes that emits light.

Every time the switch is pressed, it is possible to switch to 3 patterns of blue / white light emission → blue only light emission → white only light emission. (photo1)

Unlike conventional LED kits, battery replacement is unnecessary.

You can use it repeatedly by charging with USB cable while wearing it in Diabolo.

Corresponding cable is miniUSB Type B.

※ The cable for charging is not included. Please purchase separately from here. .

Brightness is dramatically increased than conventional LED kit.

(The 4th photo, the one that glows red on the left side of the cup becomes the conventional LED, the right side becomes the new LED.) ※ The cup uses Fairin Clear White.

Since it is not charged at the time of purchase, please be forewarned.

Since the weight of the LED itself is about 46 g on both sides, it will be slightly heavier, so we recommend using a combination of carbon washer and a new hybrid accelerator.

In that case, weight reduction of up to 26 g is possible.

★ About Diabolo

This product is only LED kit.

Because the Diabolo body is sold separately, please be careful.

★ With regard to installable Diabolo

Normal type diabolo can be installed.

(Starter Diabolo / Failin / Shaolin / Genfourin / Soarin / Evolution Diabolo)

★ About Bearing type Diabolo

When attaching to a bearing type diabolo, use either a metal washer, a carbon washer, a metal washer light, and install the attached nut between the washer and the LED kit.

★ About Mini Diabolo

Although it is possible to attach itself to Mini Diabolo, the LED may be damaged when it is dropped to the ground and it may not be shining.

As it can happen due to the nature of the product, even if it gets damaged, it will be out of the scope of return / exchange, so please be forewarned.

★ About necessary parts when installing

Either metal washer, carbon washer, or metal washer light is required.

Normal type bolts are required.

※ Can not be mounted on the plastic washer that is attached to the Bearing type Diabolo.

* When using the bolt attached to Diabolo originally, please remove the nut by pinching the bolt with pliers etc.

★ About when the LED light does not light up

It is in a state that it is not charged at the time of delivery of goods.

Please use it after first charging.

Please use miniUSB Type B code for charging.

★ About the lighting duration and charging time

· Lighting time

Only blue light, about 50 minutes

Only white on, about 1 hour 20 minutes

Both lit, about 30 minutes

Charging time Approximately 30 minutes (when using 1A charger)

weight Approximately 23 g (one side)