In the beginning of April 2015, we changed it to be used with white bearings.
With hints from traditional Japanese music, a new solo piece, which evolved as a new shape while taking advantage of the characteristics of traditional Diabolo, was completed.
The basic way of playing is to turn the axis perpendicular to the ground and rotate like a Japanese solo piece. In addition, you can combine a combination with Diabolo’s horizontal turn (Horizon) as well as putting the rotating top diabolo on the palm or the arm, and you can make a pattern of a new technique that has never existed.
Moreover, by installing the stabilizer bearing, the range of the technique further widens. A stabilizer bearing is an RF original part with a ball bearing attached to the end of a rod that is attached to the screw part by extension.
By attaching this, it is possible to lift the top diabolo directly from above, it is possible to easily carry out skills that can be placed on arms and feet, and tilt correction.
★ About hand stick
Hand stick is not included. Please purchase separately.
★ About Diabolo’s blur
When high speed rotation is applied, blurring may occur, but this can not be prevented on the product.
Also, if it falls on a hard ground such as concrete, the axis may be distorted, causing blurring during rotation to deteriorate.
Exchange and return on blur can not be done, so please be forewarned.
★ About color variations
The color variation is as follows.
From the left: White / Red / Turquoise Blue / Green / Yellow / Orange
From the left of the picture 3 pink / blue / light purple / fluorescent yellow / clear white / pink
From the left of the 4th photo, Purple / Black / Stabilizer Top Diabolo (Red)
Top diabolo always rotates clockwise without being stabilized on the spot even if rotation is applied because the center of gravity is not even right and left. We can continue to accelerate without problem by adjusting the direction of the body according to the rotation, but this time we will introduce the adjustment method using the stick and the string without changing the orientation of the body.
Hold the tip of the top diabolo like the photo and throw it to the string by rotating counterclockwise in the same way as slow start.
Then quickly lap the thrown diabolo and put it in a state of winding it all together.
Diarboro starts to tilt clockwise right when it is put in the lap state. Continue to rotate as it is and the string will twist and it will not be able to rotate, so you can adjust it well.
From here is the point. Take the tip of the right hand stick so that it goes from the bottom to the top of the grip of the left hand stick and put the string in the grip.
Continue to grip the string with the left hand stick and bring it forward. At this time, you have to temporarily release your left finger from the stick and you can not send the string forward, so you need some tips
You can accelerate diabolo by repeating it. We will always do it in the lap state after .
Diabolo Standard Equipment: Bearing Nut, Internal Tooth Washer, Metal Washer, Inner for Bearing, Metal Mini Washer, Rotating Bearing Normal Accelerator, Top Diabolo End Parts, Ferrin Cup
Diameter Height Weight
About 125 mm Approx 125 mm Approximately 220 g
Reviews
There are no reviews yet.