USB Charging type LED kit (to order)

The brightness of LED light attached to Diabolo is increased and it is new.
It has a built-in circular base with three blue and three white two-color light-emitting diodes that emit light.

Every time the switch is pressed, it is possible to switch to 3 patterns of blue / white light emission → blue only light emission → white only light emission. (photo1)

Unlike conventional LED kits, battery replacement is unnecessary.
You can use it repeatedly by charging with USB cable while wearing it in Diabolo.
Corresponding cable is miniUSB Type B.
* Since the cable for charging is not included, please purchase separately at home electronics mass retail stores and so on.

Brightness has been dramatically increased compared to conventional LED kits.
(The 4th photo, the one that glows red on the left side of the cup becomes the conventional LED, the right side becomes the new LED.) ※ The cup uses Fairin Clear White.

Since it is not charged at the time of purchase, please be forewarned.

Since the weight of the LED itself is about 46 g on both sides, it will be slightly heavier, so we recommend using a combination of a carbon washer and a new hybrid accelerator.
In that case, weight reduction of up to 26 g is possible.


★ About Diabolo
This product is only LED kit.
Diabolo body is sold separately, so please be careful.
★ With regard to installable Diabolo
Normal type diabolo can be installed.
(Starter Diabolo / Faylin / Shaolin / Genfourin / Soaring)
★ About Diabolo of bearing type
When attaching to a bearing type diabolo, use a metal washer or a carbon washer, and install the attached nut between the washer and the LED kit.
★ About Mini Diabolo
Although it is possible to attach itself to Mini Diabolo, the LED may be damaged when it is dropped to the ground and it may not be shining.
As it can happen due to the nature of the product, even if it gets damaged, it will be out of the scope of return / exchange, so please be forewarned.
★ About necessary parts when installing
A metal washer or carbon washer is required.
Normal type bolts are required.
* When using the bolt attached to Diabolo originally, please remove the nut by pinching bolts with pliers etc.
★ About when the LED light does not light up
It is in a state that it is not charged when delivering goods.
Please use it after first charging.
Please use miniUSB Type B code for charging.
★ About the lighting duration and charging time
·Lighting time
Only blue light, about 50 minutes
Only white on, about 1 hour 20 minutes
Both lit, about 30 minutes

·charging time
Charging time Approx. 30 minutes (when using 1A charger)


Weighs about 23 g (one side)