Juggling Equipment
USB Charging type LED kit (to order)
$50.00
The brightness of LED light attached to Diabolo is increased and it is new.
It has a built-in circular base with three blue and three white two-color light-emitting diodes that emit light.
Every time the switch is pressed, it is possible to switch to 3 patterns of blue / white light emission → blue only light emission → white only light emission. (photo1)
Unlike conventional LED kits, battery replacement is unnecessary.
You can use it repeatedly by charging with USB cable while wearing it in Diabolo.
Corresponding cable is miniUSB Type B.
* Since the cable for charging is not included, please purchase separately at home electronics mass retail stores and so on.
Brightness has been dramatically increased compared to conventional LED kits.
(The 4th photo, the one that glows red on the left side of the cup becomes the conventional LED, the right side becomes the new LED.) ※ The cup uses Fairin Clear White.
Since it is not charged at the time of purchase, please be forewarned.
Since the weight of the LED itself is about 46 g on both sides, it will be slightly heavier, so we recommend using a combination of a carbon washer and a new hybrid accelerator.
In that case, weight reduction of up to 26 g is possible.
★ About Diabolo
This product is only LED kit.
Diabolo body is sold separately, so please be careful.
★ With regard to installable Diabolo
Normal type diabolo can be installed.
(Starter Diabolo / Faylin / Shaolin / Genfourin / Soaring)
★ About Diabolo of bearing type
When attaching to a bearing type diabolo, use a metal washer or a carbon washer, and install the attached nut between the washer and the LED kit.
★ About Mini Diabolo
Although it is possible to attach itself to Mini Diabolo, the LED may be damaged when it is dropped to the ground and it may not be shining.
As it can happen due to the nature of the product, even if it gets damaged, it will be out of the scope of return / exchange, so please be forewarned.
★ About necessary parts when installing
A metal washer or carbon washer is required.
Normal type bolts are required.
* When using the bolt attached to Diabolo originally, please remove the nut by pinching bolts with pliers etc.
★ About when the LED light does not light up
It is in a state that it is not charged when delivering goods.
Please use it after first charging.
Please use miniUSB Type B code for charging.
★ About the lighting duration and charging time
·Lighting time
Only blue light, about 50 minutes
Only white on, about 1 hour 20 minutes
Both lit, about 30 minutes
·charging time
Charging time Approx. 30 minutes (when using 1A charger)
Weighs about 23 g (one side)
Various parts for aluminum rotary bearing (Please contact us for availability)
$0.00
It is an aluminum rotary bearing part.
It can be attached to all Diabolo except for Xiaolin.
The content of the inexpensive parts set is as follows.
· 2 nuts for bearing
· Metal mini washer × 4
· Falin washer × 2
· Lock parts × 2 pieces
· Bearing inner (black) × 1 piece
· Bearing inner (white) × 1 piece
· 1 rotating aluminum bearing accelerator
· Bolt for bearing × 1
In addition, it is also possible to purchase each part individually.
Please select from the order form.
★ In the case of purchasing a parts set, the inner is divided into black and white.
★ When playing, please be sure to point the black inner towards yourself.
★ When you reassemble after disassembling, such as removing the rotating bearing from the bolt, please be careful not to reverse the direction.
★ Each part has different price. Please pay attention when ordering.
★ In case of purchase individually, the nut for bearing, metal mini washer, lock part, inner for bearing are all sold on one side. If you need both sides please be sure to purchase two pieces.
Various parts for rotary bearings (Please contact us for availability)
$0.00
It is a part for rotary bearing.
It can be attached to all Diabolo except for Xiaolin.
The content of the inexpensive parts set is as follows.
· 2 nuts for bearing
· Metal mini washer × 4
· Falin washer × 2
· Lock parts × 2 pieces
· Bearing inner (black) × 1 piece
· Bearing inner (white) × 1 piece
· Rotating bearing accelerator × 1 piece
· Bolt for bearing × 1
In addition, it is also possible to purchase each part individually.
Please select from the order form.
Various parts for Sun Valley
$51.00
As for sun-by-bolt bolt and inner, the shape has changed from the end of April to improve strength.
The previous ones are (1) a round type with no flat part on the bolt, (2) a square type in which two parts of the bolt are flattened, (3) a D-shaped part of the bolt flattened It became a type type.
There are two grooves in the inner inner part where you pass the bolt, and the bolt has a protrusion that is hooked on the groove.
As for the bolts and inner for the future Sun Virgin, we will sell only the new type (groove type).
Customers who ordered bolts and inner after May 21, 2012, please confirm the shapes of bolts and inner bodies currently in hand, customers who have things other than groove types, be sure to bolt and inner Please order together.
※ Please be aware that there is no compatibility between the one of another shape which had been sold in the past and the one of the new type.
Various parts for Wovalin G2
$67.00
From August 2017, we improved inner parts and adopted lock parts. Durability has improved dramatically.
★ There is no compatibility with Sunbiling in regard to the bolt for wobbling, the double ball bearing for wobblyin, and the accelerator for the wobblyin. be careful.
★ If you purchase the Evolution Rim, Woo Billy Inner (Groove Type), Wovalin Bolt (Groove Type), you can divert it to the previous Evolution Wu Bai Lin.
★ In the case of purchasing a parts set, the washer is divided into black and white. In case
★ When playing, please be sure to turn the black washer toward yourself.
★ When you reassemble it after disassembling, such as removing the accelerator from the bolt, please be careful so that the direction of the accelerator etc. does not become opposite.
★ Each part has different price. Please be careful enough when ordering.
★ If you prefer a color inner, rim of your choice please fill in that remarks column in the remarks column.
★ In case of purchase individually, nut for bearing, ferrin washer, washer for washing, metal mini washer, rim for evolution, woo bylin inner (groove type), double ball bearing for wobblyin, lock part, spacer for wovalin are all on one side It will be sold. If you need both sides please be sure to purchase two pieces.
Various parts for Xiaolin
$30.00
It is a part for Xiaolin.
It can be installed only in Xiaolin.
The content of the inexpensive parts set is as follows.
· 2 nuts for Xiaolin
Internal tooth washer × 2
· Metal washer (RYO YABE engraved) × 2 pieces
· Inner for Xiaolin × 2
· Accelerator × 1 piece
· Normal type bolt × 1 piece
In addition, it is also possible to purchase each part individually.
Please select from the order form.
Velocity Blue
$23.00
Vintage rolling hoop (Please contact for availability)
$0.00
These classic hoops were wooden wheels for bicycles. They are reproduced with durable nylon resin.
It began with the Juggler called William Everhart in the AD 1890-1901 and was used for subsequent successors Howard Nicloas, Arthur Ward, Kraton Family, Bob Bramson and others.
The size and usage of the wheel has changed by the performer. Generally, L size is used to roll on the stage, M size is 3 body rolling, S size is used for more toss juggling.
It is also possible to use a groove dug in the hoop and roll over the string.
S size : Diameter 37.5 mm
M size : Diameter 50 mm
L size : Approximately 62.5 mm