Aerial / Acrobatics
Aerial acrobatics
Aerial Cube / LED Cube
Aerial Hoop, Lyra, Sphere, Spiral, Heart, Chandelier, Aerial lollipop
Aerial straps
Aerial Trapeze
Cyr Wheel / German Wheel / Crossed wheel
Crossed Wheel
Cyr Wheel
German Wheel / Rhönrad
Cyr Wheel / German Wheel by Zimmermann
Slinky Costumes
Juggling Equipment
Tight-wire self standing
Pole
Pole dance
American Wheel of death
Theatrical Mechanics – Stage Equipment & Rigging Systems
Mobile constructionsShop
Genfourin
$54.00
This diabolo is specifically for advanced users who can handle multiple diabolos.
The greatest feature of genufourin is that the edge of the cup is thin and it is designed to make it difficult for centrifugal force to hang. Diavolo which is difficult to receive centrifugal force has no sustaining power of rotation, but it feels very light with the bodily sensation, it is easier to control, more delicate control is possible.
In addition, the inner is adopting the Faylin inner, making it less inclined. Thanks to these effects, it is the perfect diabolo for exercises of three wind mill systems.
The material of the cup is made of stone-based material which is hard to bear big scratches even when used outdoors, it is made more rigid, the friction of the cup is also less, the stick hitting stick reduces the reduction of rotation to the utmost limit when correcting the inclination .
Wubalin G2
$88.00
From August 2017, we improved inner parts and adopted lock parts. Durability has improved dramatically.
Since conventional double ball bearings were fitted with inner ball bearings by press fitting, due to the impact of the fall and the degree of tightening of the nut, the inner ball bearing entered deep, causing resistance to occur .
We solved this problem, by adopting a flanged one (photo 8th) on the inner ball bearing.
In addition, there was a problem that the inner metal part was easy to lose when a strong shock was applied, but this problem was solved by adopting metal of different material.
Made in Japan
Soarin Galaxy
$460.00
It is the highest-grade model which applied semi-transparent silver vacuum deposition inside the soaring cup.
Unlike ordinary vacuum deposition, vapor deposition does not peel off when the material deforms
We adopt state-of-the-art technology which could not be thought with common sense until now.
By installing the LED kit, the light reflects on the cup and enables the production of strong light.
Hand stick is not included. Please purchase separately.
Since there is a danger of discoloration by ultraviolet rays, we recommend storing in a place not exposed to sunlight.
Water meteor
$115.00
Enrico Rastelli Leather ball
$63.00
Renegadesignlab (RdL) Enrico Rastelli replica ball. This is the same sized balls used historically by many jugglers in the 1920-40’s. The ball was used for all kinds of manipulations, like head rolls, body rolls, and statue finishes like the photo on this page.
The ball can be inflated to the hardness you like, this will effect the size a little bit. The ball are very well made and have a very nice soft leather grippy feel. The balls are very classy looking for stage performances.
USB Charging type LED kit (to order)
$50.00
The brightness of LED light attached to Diabolo is increased and it is new.
It has a built-in circular base with three blue and three white two-color light-emitting diodes that emit light.
Every time the switch is pressed, it is possible to switch to 3 patterns of blue / white light emission → blue only light emission → white only light emission. (photo1)
Unlike conventional LED kits, battery replacement is unnecessary.
You can use it repeatedly by charging with USB cable while wearing it in Diabolo.
Corresponding cable is miniUSB Type B.
* Since the cable for charging is not included, please purchase separately at home electronics mass retail stores and so on.
Brightness has been dramatically increased compared to conventional LED kits.
(The 4th photo, the one that glows red on the left side of the cup becomes the conventional LED, the right side becomes the new LED.) ※ The cup uses Fairin Clear White.
Since it is not charged at the time of purchase, please be forewarned.
Since the weight of the LED itself is about 46 g on both sides, it will be slightly heavier, so we recommend using a combination of a carbon washer and a new hybrid accelerator.
In that case, weight reduction of up to 26 g is possible.
★ About Diabolo
This product is only LED kit.
Diabolo body is sold separately, so please be careful.
★ With regard to installable Diabolo
Normal type diabolo can be installed.
(Starter Diabolo / Faylin / Shaolin / Genfourin / Soaring)
★ About Diabolo of bearing type
When attaching to a bearing type diabolo, use a metal washer or a carbon washer, and install the attached nut between the washer and the LED kit.
★ About Mini Diabolo
Although it is possible to attach itself to Mini Diabolo, the LED may be damaged when it is dropped to the ground and it may not be shining.
As it can happen due to the nature of the product, even if it gets damaged, it will be out of the scope of return / exchange, so please be forewarned.
★ About necessary parts when installing
A metal washer or carbon washer is required.
Normal type bolts are required.
* When using the bolt attached to Diabolo originally, please remove the nut by pinching bolts with pliers etc.
★ About when the LED light does not light up
It is in a state that it is not charged when delivering goods.
Please use it after first charging.
Please use miniUSB Type B code for charging.
★ About the lighting duration and charging time
·Lighting time
Only blue light, about 50 minutes
Only white on, about 1 hour 20 minutes
Both lit, about 30 minutes
·charging time
Charging time Approx. 30 minutes (when using 1A charger)
Weighs about 23 g (one side)